Firmware Download For 8039 SIP Video Mullion Intercom

This page provides the files necessary to upgrade your 8039 to Firmware Version 3.4.4.

SELECT FIRMWARE

WHAT’S NEW IN FIRMWARE VERSION 3.4.4:

  • Add MED-Application Type extension to LLDP and other VLAN improvements
  • Allow provisioning of trusted CA certificates
  • Automatic Gain Control improvement
  • Fix CDP VLAN ID parsing
  • Fix notification in web interface during firmware upgrades from URL
  • Increase number of allowed outside codes to 25
  • Increase priority of Poly priority and emergency groups
  • Minor bug fixes

FIRMWARE UPGRADE PROCEDURE

Please select the current firmware version your 8039 is running and follow the instructions in one of the sections below:

Version 2.0.1 or Higher

STEP 1 – Upgrade to 2.1 using either method below

Method 1: Upgrade Using URL Link (Internet access required)
Recommended method if your device(s) can access the Internet

  • Open the web interface, go to System > Firmware. Select the ‘From URL Method’. Copy and Paste the URL below and click Upgrade.
  • Firmware Upgrade (v2.1): https://www.algosolutions.com/firmware/algo-8039-2.1-bundle.sfw
    Note: Upgrade will take approximately 6 minutes to complete.

Method 2: Upgrade Using Downloaded Files
Alternate method for devices that cannot access the Internet

  • First, download the file from the link below, and save to your local computer.
  • Next, open the web interface, and go to “System > Firmware”. In the Upgrade section, select the .sfw file in the “Signed Firmware File” field. Click Upgrade.
  • Firmware Upgrade (v2.1): algo-8039-2.1-bundle.sfw   (92.8 MB)
    Note: Upgrade will take approximately 6 minutes to complete.

STEP 2 – Upgrade to 3.2.4 using either method below

Method 1: Upgrade Using URL Link (Internet access required)
Recommended method if your device(s) can access the Internet

  • Open the web interface, go to System > Firmware. Select the ‘From URL Method’. Copy and Paste the URL below and click Upgrade.
  • Firmware Upgrade (v3.2.4): https://www.algosolutions.com/firmware/algo-8039-3.2.4-bundle.sfw
    Note: Upgrade will take approximately 25 minutes to complete.

Method 2: Upgrade Using Downloaded Files
Alternate method for devices that cannot access the Internet

  • First, download the file from the links below, and save to your local computer.
  • Next, open the web interface, and go to “System > Firmware”. In the Upgrade section, select the .sfw file in the “Signed Firmware Image” field. Click Upgrade.
  • Firmware Upgrade (v3.2.4): algo-8039-3.2.4-bundle.sfw   (94.5 MB)
    Note: Upgrade will take approximately 25 minutes to complete.

STEP 3 – Upgrade to 3.4.4 using either method below

Method 1: Upgrade Using URL Link (Internet access required)
Recommended method if your device(s) can access the Internet

  • Open the web interface, go to System > Firmware. Select the ‘From URL Method’. Copy and Paste the URL below and click Upgrade.
  • Firmware Upgrade (v3.4.4): https://www.algosolutions.com/firmware/algo-8039-3.4.4f.sfw
    Note: Upgrade will take approximately 25 minutes to complete.

Method 2: Upgrade Using Downloaded Files
Alternate method for devices that cannot access the Internet

  • First, download the files from the links below, and save to your local computer.
  • Next, open the web interface, and go to “System > Firmware”. In the Upgrade section, select the .sfw file in the “Signed Firmware Image” field. Click Upgrade.
  • Firmware Upgrade (v3.4.4): algo-8039-3.4.4f.sfw   (109 MB)
    Note: Upgrade will take approximately 10 minutes to complete.

Version 1.6 or Lower

STEP 1 – Upgrade to 1.7.6 using either method below

Method 1: Upgrade Using URL Link (Internet access required)
Recommended method if your device(s) can access the Internet

  • Open the web interface, go to System > Maintenance. Select the ‘From URL Method’. Copy and Paste the URL below and click Upgrade.
  • Firmware Upgrade (v1.7.6): https://www.algosolutions.com/firmware/algo-8039-1.7.6-bundle.fw
    Note: Upgrade will take approximately 10 minutes to complete.

Method 2: Upgrade Using Downloaded Files
Alternate method for devices that cannot access the Internet

  • First, download the files from the links below, and save to your local computer.
  • Next, open the web interface, and go to “System > Maintenance”. In the Upgrade section, select the .fw file in the “Firmware Image” field, and the .md5 file in the “MD5 Checksum” field. Click Upgrade.
  • Firmware Upgrade (v1.7.6):
    algo-8039-1.7.6-bundle.fw   (102 MB)
    algo-8039-1.7.6-bundle.md5    (60 B)
    Note: Upgrade will take approximately 10 minutes to complete.

STEP 2 – Upgrade to 2.1 using either method below

Method 1: Upgrade Using URL Link (Internet access required)
Recommended method if your device(s) can access the Internet

  • Open the web interface, go to System > Maintenance. Select the ‘From URL Method’. Copy and Paste the URL below and click Upgrade.
  • Firmware Upgrade (v2.1): https://www.algosolutions.com/firmware/algo-8039-2.1-bundle.sfw
    Note: Upgrade will take approximately 6 minutes to complete.

Method 2: Upgrade Using Downloaded Files
Alternate method for devices that cannot access the Internet

  • First, download the files from the links below, and save to your local computer.
  • Next, open the web interface, and go to “System > Firmware”. In the Upgrade section, select the .sfw file in the “Signed Firmware File” field. Click Upgrade.
  • Firmware Upgrade (v2.1): algo-8039-2.1-bundle.sfw (92.8 MB)
    Note: Upgrade will take approximately 6 minutes to complete.

STEP 3 – Upgrade to 3.2.4 using either method below

Method 1: Upgrade Using URL Link (Internet access required)
Recommended method if your device(s) can access the Internet

  • Open the web interface, go to System > Firmware. Select the ‘From URL Method’. Copy and Paste the URL below and click Upgrade.
  • Firmware Upgrade (v3.2.4): https://algosolutions.com/firmware/algo-8039-3.2.4-bundle.sfw
    Note: Upgrade will take approximately 25 minutes to complete.

Method 2: Upgrade Using Downloaded Files
Alternate method for devices that cannot access the Internet

  • First, download the files from the links below, and save to your local computer.
  • Next, open the web interface, and go to “System > Firmware”. In the Upgrade section, select the .sfw file in the “Signed Firmware Image” field. Click Upgrade.
  • Firmware Upgrade (v3.2.4): algo-8039-3.2.4-bundle.sfw   (94.5 MB)
    Note: Upgrade will take approximately 25 minutes to complete.

STEP 4 – Upgrade to 3.4.4 using either method below

Method 1: Upgrade Using URL Link (Internet access required)
Recommended method if your device(s) can access the Internet

  • Open the web interface, go to System > Firmware. Select the ‘From URL Method’. Copy and Paste the URL below and click Upgrade.
  • Firmware Upgrade (v3.4.4): https://www.algosolutions.com/firmware/algo-8039-3.4.4f.sfw
    Note: Upgrade will take approximately 25 minutes to complete.

Method 2: Upgrade Using Downloaded Files
Alternate method for devices that cannot access the Internet

  • First, download the files from the links below, and save to your local computer.
  • Next, open the web interface, and go to “System > Firmware”. In the Upgrade section, select the .sfw file in the “Signed Firmware Image” field. Click Upgrade.
  • Firmware Upgrade (v3.4.4): algo-8039-3.4.4f.sfw   (109 MB)
    Note: Upgrade will take approximately 10 minutes to complete.

PAST FIRMWARE RELEASE NOTES

Past Release Notes

What’s new in Firmware Version 2.0.1:

  • Reduced idle power draw (reduces heat when video is not active)
  • Support for multiple network door controllers
  • Snapshot mode
  • Improved auto-exposure

What’s new in Firmware Version 1.7.6:

  • TLS (secure SIP signaling)
  • SIP over TCP (allows increased packet size over UDP)
  • DNS SRV Record
  • CDP/LLDP automatic VLAN assignment
  • Add support for 802.1x network security
  • Improve DNS Caching
  • Add “Display Name” field for Caller ID on outbound calls
  • Minor bug fixes

What’s new in Firmware Version 1.5.6:

  • Enhanced DHCP Option 66 support (full URL supported, including protocol and path)
  • Support for DHCP Options 150, 160 and 42
  • Support for partial provisioning (allows existing settings to be retained), disabled by default
  • Improved auto-exposure
  • Minor bug fixes

Firmware Update Notifications
If you wish to receive an email for future firmware updates, please complete the form to be added to our list.

Firmware Notifications

FIRMWARE DOWNLOAD LINKS

Need firmware for another device?
Obtain additional product firmware downloads.