Firmware Download for the 8190 SIP Speaker – Clock

 

Algo 8190 SIP Speaker - Clock for IP Paging in Classrooms & Other Commerical PA Applications

This page provides the files necessary to upgrade your 8190 to Firmware Version 3.4.4.

 

What’s new in Firmware Version 3.4.4:

  • Add support for the 2507 Ring Detector
  • Add MED-Application Type extension to LLDP and other VLAN improvements
  • Add emergency announcement status to the status tab
  • Allow provisioning of trusted CA certificates
  • Automatic Gain Control improvement
  • Fix CDP VLAN ID parsing
  • Fix notification in web interface during firmware upgrades from URL
  • Fix ring extensions not holding secure passwords
  • Fix SRTP SDP negotiation issues
  • Increase priority of Poly priority and emergency groups
  • InformaCast module improvements
  • Minor bug fixes

 

For past firmware release notes visit this page.

 

Firmware Upgrade Procedure

Please select the current firmware version your 8190 is running and follow the instructions in one of the sections below:

 

3.2.1 or Higher (click to expand)

Method 1: Upgrade Using URL Link (Internet access required)

Recommended method if your device(s) can access the Internet

Open the web interface, go to System > Firmware. Select the ‘From URL Method’. Copy and Paste the URL below and click Upgrade.

 

Firmware Upgrade (v3.4.4):

https://www.algosolutions.com/firmware/algo-8190-3.4.4f.sfw

Note: Upgrade will take approximately 10 minutes to complete.

 

Method 2: Upgrade Using Downloaded Files

Alternate method for devices that cannot access the Internet

First, download the file from the link below, and save to your local computer.

Next, open the web interface, and go to “System > Firmware”. In the Upgrade section, select the .sfw file in the “Signed Firmware File” field. Click Upgrade.

 

Firmware Upgrade (v3.4.4):

Note: Upgrade will take approximately 10 minutes to complete.

1.7 to 1.7.10 (click to expand)

Step 1: Upgrade to 3.2.1 using either method below

Method 1: Upgrade Using URL Link (Internet access required)

Recommended method if your device(s) can access the Internet

Open the web interface, go to System > Maintenance. Select the ‘From URL Method’. Copy and Paste the URL below and click Upgrade.

 

Firmware Upgrade (v3.2.1):

https://www.algosolutions.com/firmware/algo-8190-3.2.1-bundle.fw

Note: Upgrade will take approximately 25 minutes to complete.

 

Method 2: Upgrade Using Downloaded Files

Alternate method for devices that cannot access the Internet

First, download the files from the links below, and save to your local computer.

Next, open the web interface, and go to “System > Maintenance”. In the Upgrade section, select the .fw file in the “Firmware Image” field, and the .md5 file in the “MD5 Checksum” field. Click Upgrade.

 

Firmware Upgrade (v3.2.1):

Note: Upgrade will take approximately 25 minutes to complete.

 

Step 2: Upgrade to 3.4.4 using either method below

Method 1: Upgrade Using URL Link (Internet access required)

Recommended method if your device(s) can access the Internet

Open the web interface, go to System > Firmware. Select the ‘From URL Method’. Copy and Paste the URL below and click Upgrade.

 

Firmware Upgrade (v3.4.4):

https://www.algosolutions.com/firmware/algo-8190-3.4.4f.sfw

Note: Upgrade will take approximately 10 minutes to complete.

 

Method 2: Upgrade Using Downloaded Files

Alternate method for devices that cannot access the Internet

First, download the files from the links below, and save to your local computer.

Next, open the web interface, and go to “System > Firmware”. In the Upgrade section, select the .sfw file in the “Signed Firmware Image” field. Click Upgrade.

 

Firmware Upgrade (v3.4.4):

Note: Upgrade will take approximately 10 minutes to complete.

 

Algo Product Firmware Download Links

Follow this link to obtain additional product firmware downloads.

 


Firmware Update Notice

If you wish to receive an email for future firmware updates, please complete the form to be added to our list.

  • This field is for validation purposes and should be left unchanged.