Documentation
Compatible Hosted / Cloud & Premise VoIP Phone Systems with Algo SIP Endpoints
All Algo IP products for paging, alerting and security intercom register with most hosted / cloud or premise-based telephone systems supporting 3rd party SIP endpoints. The list below represents a summary of known phone systems which support Algo SIP devices. Additional phone systems may not be listed, however, as long as 3rd party SIP endpoints are supported by the phone system then Algo endpoints will register without issue. Please feel free to contact Algo with any questions or to let us know of other phone systems to add to the list below.
For general tips on registering Algo endpoints, please refer to our SIP Registration Guide.
The links below will assist with Algo endpoint configuration. If a specific Algo product is not referenced, the registration steps for Algo devices listed will be similar. Please contact us with additional configuration notes/resources to share with the Algo user community. Thanks!
Compatible VoIP Phone Systems
3Com
3CX
8x8
Contact 8x8 directly for endpoint registration process
Aastra
Note: Selected Aastra IP telephones support an RTP multicast from Algo paging and alerting endpoints. Check manufacturer specification for details.
Adtran
Alcatel
Allworx
Altigen
Asterisk (Digium)
Note: Selected Digium IP telephones support an RTP multicast from Algo paging and alerting endpoints. Check manufacturer specification for details.
Audiocodes SBC
Audiocodes Configuration Notes
Avaya
IP Office - 8028* 8036*** 8128 8180** 8188/8186 8301 3226
Note: *8028 was tested on IPO 11 and is also representative of 8128 SIP Strobe Light for similar configuration steps.
**8180 was tested on IPO 11 and is also representative of the 8186 horn, 8188 and 8189 ceiling speakers, 8301 and 8373 paging adapters, and 8201 intercom for similar configuration steps.
***8036 was tested on IPO 11 and is also representative of the 8039 SIP Video Intercom.
Aura Communication Manager - 8036 8028* 8180** 3226
Note: *8028 was tested on Aura 8 and is also representative of 8128 SIP Strobe Light for similar configuration steps.
**8180 was tested on Aura 8 and is also representative of the 8186 horn, 8188 and 8189 ceiling speakers, 8301 and 8373 paging adapters, and 8201 intercom for similar configuration steps.
Note: 3rd party SIP endpoints can be configured in a Page Group on IPO and Aura platforms. Check manufacturer specification for details.
Bell Aliant Unified Communications (BAUC)
Bell Total Connect (BTC) using Polycom Group Page
BroadSoft BroadWorks
8180 Partner Configuration Guide - Paging
8180 Partner Configuration Guide - Loud Ringing
8186/8188/8301 Partner Configuration Guide
8036/8039/8201/8203 Partner Configuration Guide
8028 Partner Configuration Guide
Cisco Call Manager (CUCM)
8186 SIP Horn Speaker Test Plan & Report CUCM 12.0
8186 SIP Horn Speaker Config Guide CUCM 12.0
Note: For all other Algo SIP endpoint speakers including the 8180/8188/8189, similar firmware is used across all these devices and the same CUCM interoperability and configuration steps will apply.
8301 Paging Adapter & Scheduler Test Plan & Report CUCM 12.0
8301 Paging Adapter & Scheduler Config Guide CUCM 12.0
Note: For the Algo 8373 Zone Paging Adapter similar firmware is used and the same CUCM interoperability and configuration steps will apply.
8201 SIP Intercom Test Plan & Report CUCM 12.0
8201 SIP Intercom Config Guide CUCM 12.0
Note: For all other Algo SIP doorphone / intercoms including the 8028/8036/8039 and the 8128 strobe light, the same CUCM interoperability and configuration steps will apply.
VIDEO: How To Configure An 8180 As A Loud Ringer
Note: Singlewire InformaCast is supported on 8180(G2)/8186/8188/8189/8301 endpoints. Any Algo IP speaker, paging adapter or strobe light can also be configured as a Legacy Paging Device. See details on list below under Singlewire.
Cisco UC500 / UC5XX
Cisco Call Manager Express (CME)
Cisco Webex Calling (Spark)
Note: 3rd party SIP devices are currently not supported on this platform.
Comcast
Note: Comcast does not permit registration of a 3rd party SIP endpoint, nor does it permit configuration of Polycom phones for a Group Page multicast involving an Algo endpoint. Only the 8180 SIP Audio Alerter is sold by Comcast pre-configured for loud ringing - not voice paging.
CoreDial
CudaTel
Denwa
Digium Switchvox
Note: Selected Digium telephones support an RTP multicast from Algo paging and alerting endpoints. Check manufacturer specification for details.
Elan Home Systems
Elastix
Epygi Quadro
Fonality
FortiNet/Talkswitch
FreedomVoice
FreePBX
Note: 3rd party SIP endpoints can be configured in a Page Group. Check manufacturer specification for details.
FreeSwitch
Fuze
Genband
Genetec Sipelia
Grandstream
Interactive Intelligence
Intermedia
Ipitomy
Jive
LG Ericcson
Metaswitch
8180G2/8186/8188/8301 Endpoint Pack
Megapath/Speakeasy Hosted VoIP
Mitel
MiCloud Connect Configuration Guide
8180 Configuration Note - 5000
8180 Configuration Note - 3300
8028 Configuration Note - 5000
8028 Configuration Note - 3300
Note: Selected Mitel IP telephones support an RTP multicast from Algo paging and alerting endpoints. Check manufacturer specification for details.
NEC
Net2Phone
Netcelerate
Netsapiens
Nextiva
OpenPBX
OnSIP
Panasonic
Panterra
PBXact
Polycom Solution Guides
1. Polycom Group Page with VVX600 and Algo 8180 / 8186 / 8188 (& 8189) IP Speakers
2. Polycom Group Page with VVX600 and Algo 8301 Paging Adapter
3. Paging and Loud Ringing with VVX600 and Algo 8180 SIP Audio Alerter
4. Algo 2506 Polycom Ring Detector with VVX Telephones and Algo 8180/8186/8188/8128 endpoints
5. BroadWorks Paging and Loud Ringing with VVX600 and Algo 8180 SIP Audio Alerter
6. Video Call with VVX600 and Algo 8036 SIP Multimedia Intercom
RingCentral
Singlewire InformaCast
8180(G2)/8186/8188/8189/8301 support InformaCast. Requires SL7100 Singlewire License per endpoint. As an alternative, the following part numbers are available to order which include the Singlewire firmware enabled: 8128-IC, 8180-IC, 8186-IC, 8188-IC, 8189-IC, 8190-IC and 8301-IC.
Integrating Singlewire with Algo 8180 as a Legacy Paging Device (LPD) - White Paper. Note: Similar configuration steps would apply to all other Algo IP paging speakers, adapters and strobe lights. No Singlewire license required.
sipXecs 3
Skype for Business / Teams
Using a Sonus or Audiocodes SBC will permit an Algo SIP endpoint to register with Skype for Business/Teams. At the present time Algo devices do not support native Skype/Teams registration. Note: Where Polycom VVX telephones are used, no Skype/Teams registration is required for Algo speakers and paging adapters when configured for Polycom Group Page. Refer to Polycom Solutions Guides for details. The same holds true for other telephone brands that support send/receive RTP multicast (e.g. Yealink).
Sonus SBC
Spectrum
Note: Spectrum does not permit registration of a 3rd party SIP endpoint.
Syn-Apps SA-Announce
Telinta
Telus Business Connect
Note: Please reference the RingCentral Provisioning Guide for details.
Toshiba
Trixbox
Unify
UnitedCloud
Verizon One Talk
Note: Verizon One Talk does not permit registration of a 3rd party SIP endpoint, nor does it permit configuration of a Polycom phone for a Group Page multicast involving an Algo endpoint.
Verizon UCaaS
Vertical
Vonage
Voice Carrier
Voyant
Wildix
Setting up Algo SIP Endpoints with Wildix PBX Platform
Xorcom
Yealink
Yealink T21P E2 Multicasting with Algo 8180 & 8301
Yealink T58V with Algo Video Intercoms 8036 & 8039
Yeastar
Zoom
Zultys