8028 SIP Doorphone

Specifications

Item Description
Compatibility SIP
Configuration Web Interface or Auto-Provisioning via TFTP, FTP or HTTP
Network Address DHCP or static IP address
NAT* STUN Server or Keep-Alive
* (Network Address Translation)
Speech Full Duplex Capable
Codec G.711
Physical Separate Controller and Door Station
Controller
Power AC Mains Adapter 95-230 V 50/60 Hz Included
Indicators Power, Door Station Status, In-Use, Door Unlock
Network Connection RJ45 Jack
Installation Shelf or wall mounted
Environmental Dry indoor location
Door Control Connection 5 Position terminal strip
Door Control Power Available 24 V, 300 mA Strike power +/-
Door Control Relay Relay C, NO, NC phone keypad activated; Maximum 30 V, 1 A
Door Station Connection RJ12 Jack Center Pair
Door Station Wiring 24 AWG Twisted Pair to 1000 Ft (300 m)
Auxiliary Input Connection RJ12 Jack Second Pair
Auxiliary Input Electrical Detects dry contact closure 24 V 4 mA sensing current
Auxiliary Input Functions Manual door release; Door control lockout; Door sensor NC (Default) or NO; Call button NC or NO; Disabled
Auxiliary Output Connection RJ12 Jack Outside Pair
Auxiliary Output Electrical Normally open switch 180 Ohms active; Maximum 30 V, 50 mA
Auxiliary Output Functions In-Use (Default); Ringing; Call button pressed; Door unlock; Door open (requires door sensor); Door alarm (requires door sensor); Door sensor NC (Default) or NO; Follow Controller input; Follow Door Station input; Disabled
Door Station
Power Provided by Controller link
Wiring Up to 1000 Ft (300 m) 24 AWG single twisted pair to controller
Signalling Digital link - bi-directional voice and data
Call Button Backlit tactile silicon rubber
Connections 6 Position terminal strip - Controller, Aux In, Aux Out
Installation Flush or surface mounted using supplied plastic bezel; Fits two gang electrical box
Environmental NEMA 3R Rated for outdoor locations; Ambient temperature -30 to +60° C.
Auxiliary Input Functions Door sensor NC or NO; Call button NC or NO (Default); Disabled
Auxiliary Input Electrical Detects dry contact closure 5 V, 1 mA sensing current
Auxiliary Output Functions In-Use; Ringing; Call button pressed (Default); Door/gate unlock; Door open (requires door sensor); Door alarm (requires door sensor); Door sensor NC (Default) or NO; Follow Controller input; Follow Door Station input; Disabled
Auxiliary Output Electrical Normally open switch 180 Ohms active; Maximum 30 V, 50 mA

 

  • In the interests of continual product development, specifications are subject to change without notice. Some features may only be available in specific firmware or hardware releases. 

8028 SIP Doorphone


 

Questions? Buy Online