8186 SIP Horn Speaker

8186 SIP Horn Speaker Specifications

Item Description
Power Input 48 V PoE IEEE 802.3af Class 0 (Max 12.95 W - Idle nominal 2.0 W) 
Speaker Double re-entrant horn speaker, 11" x 6 5/8" (30cm x 16.8cm) rectangular 
Amplifier Internal, Class D 
Audio Codecs G.711 A-law, G.711 u-law, G.722, Polycom Group Page
Other codec support available upon request. 
SIP 50 Page extensions
10 Notification (Alerting) extensions 
Multicast Receive or transmit 
Server Redundancy Primary, secondary, tertiary
Processor Linux OS ARM Cortex-A8 32-Bit RISC Processor 
Frequency Response 350 – 9,000 Hz (- 10 dB) 
SPL 116 dBA @ 1m (1 kHz sine wave) 
Dispersion Angle: 76H x 51V (2 kHz -6dB); Oriented Vertically 11” tall x 6 5/8” Wide 
Microphone Electret omnidirectional wideband 
Audio Delay 1 to 1000 ms selectable for synchronization 
Audio Processing Filtering, normalization, compression 
Audio Memory 1 GByte 
Relay Output Normally open or normally closed. Max rating 30 V 50 mA 
Relay Input Normally open or normally closed dry contact supervision. Algo 1202 Call Button, Algo 1203 Call Switch, EOL resistor termination. 
Relay Input Current Draw Detection Thresholds: - Normally Open (>4mA Active), (<4mA Idle), (N/A Tamper) 
- Normally Open with Supervision (>20mA Active), (4-20mA Idle), (<4mA Tamper) 
- Normally Closed (<4mA Active), (>4mA Idle), (N/A Tamper) 
- Normally Open with Supervision (4-20mA Active), (>20mA Active Idle), (<4mA Tamper) 
- Nominal 12V source, current limited to 40mA. Typical supervision resistor value = 1k ohm. 
Configuration
Web interface (HTTP or HTTPS) or autoprovisioning server. 
Provisioning TFTP, FTP, or HTTP, HTTPS
Supervision SNMP
NAT STUN, CRLF Keep Alive
Environmental -40 to +122 deg F (-40 to +50 deg C); Designed to meet IP66 requirements. Suitable for outdoor and wet environments when properly installed. 
Dimensions
11.8" x 6.6" x 10.2" (30cm x 16.8cm x 25.8cm) 
Horn & Enclosure
UV stablized and/or painted outdoor rated plastic with stainless steel mounting hardware. 
Mounting
Wall, ceiling, or double gang electrical box. Pole mount bracket available. 
Aim Adjustment
Three axis 
Weight
6 lb (2.7 Kg) 
Compliance
EN60950:2001, IEEE 802.3-2008, RFC3261, RoHS, CE, FCC Class A, CISPR 22 Class A, CISPR 24, CSA/UL (USA & Canada) 


Note: In the interests of continuing product improvement, specifications are subject to change without notice.

Algo 8186 SIP & Multicast Horn Wideband Speaker


 

Questions? Buy Online